Volume 5, Issue 2, April 2016, Page: 9-12
Influence of Different Weighting Materials on the Wear of N80 Metal Surface
Han Cheng, CNOOC Ltd., Zhanjiang, Guangdong, China
Qiu Zhengsong, College of Petroleum Engineering, University of Petroleum, Qingdao Shandong, China
Yang Zhonghan, CNOOC Ltd., Zhanjiang, Guangdong, China
Liu Xianyu, CNOOC Ltd., Zhanjiang, Guangdong, China
Yu Yi, CNOOC Ltd., Zhanjiang, Guangdong, China
Received: May 10, 2016;       Accepted: May 31, 2016;       Published: Jun. 14, 2016
DOI: 10.11648/j.am.20160502.11      View  4183      Downloads  166
Influence of high-density drilling fluid weighted with conventional barite, micronized barite, hematite and manganese tetroxide on the wear behavior of N80 metal surface was investigated. The worn surface morphologies and roughness of the N80 metal was observed and tested respectively by scanning electron microscope and surface roughness meter tester. The wear mechanisms of different weighting materials were also discussed. It was found that the erosion rate of N80 steel worn by micronized barite is 57.8% of it worn by conventional barite, and the erosion rate of N80 steel worn by manganese tetroxide is 43.8% of it worn by hematite. The main wear mechanism of conventional barite, micronized barite, hematite and manganese tetroxide on the metal surface is abrasive wear, plowing, planning action and surface fatigue wear, under conditions of high density drilling fluid. Manganese tetroxide and micronized barite can significantly reduce the wear on the metal surface because of filling and adsorption on the concave and convex of the metal surface, especially the roughness of N80 steel surface worn by manganese tetroxide can be reduced to 50% of the hematite.
Weighting Materials, Micronized Barite, Manganese Tetroxide, Wear, High-Density Drilling Fluid
To cite this article
Han Cheng, Qiu Zhengsong, Yang Zhonghan, Liu Xianyu, Yu Yi, Influence of Different Weighting Materials on the Wear of N80 Metal Surface, Advances in Materials. Vol. 5, No. 2, 2016, pp. 9-12. doi: 10.11648/j.am.20160502.11
Copyright © 2016 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Dong X. J., Yang Z. F., He W. T. Study and Development of Casing Wear. China Petroleum Machinery, 2008, 37 (4): 32-36.
Hou Y. J., Wang, W. W. Study Evolution of Casing Wear. Drilling & Production Technology, 2001, 24 (5): 72-74.
Tehrani A., Cliffe A., Hodder M. H. Alternative Drilling Fluid Weighting Agents: A Comprehensive Study on Ilmenite and Hematite., SPE 167937, IADC/SPE Drilling Conference and Exhibition, Fort Worth, Texas, USA, March, 2014.
Dou Y. H., Jiang X. H., Zhang F. X. Experimental Research on Casing Wear in Drilling Fluids of High Density. Lubrication Engineering, 2007, 32 (9): 26-28.
Liang E. G., Li Z. F, Wang J. M., et al. Experimental Study on Casing Wear Mechanism in Oil and Gas Wells. Petroleum Drilling Techniques, 2015, 43 (1): 69-73.
Yang C. X., Sun M. G., Tang H. L. Casing Wear Prediction and Casing Protection Technology for Extended Reach Well. China Petroleum Machinery, 2016, 44 (1): 5-9.
Han X. M, Fan J. C., Zhang L. B. Experimental Study on the Effects of Drilling Fluid Viscosity on Casing Wear. Drilling Fluid & Completion Fluid, 2007, 24 (4): 63-65.
Yan L. L., Wang J. H., Xu X. G. Study on Erosive and Magnetic Effects of Weighting Agent in a High Density Water-Based Drilling Fluid, OTC 24787, Offshore Technology Conference-Asia, Kuala Lumpur, Malaysia, March, 2014.
Quercia G., Belisario R., Rengifo R. Reduction of erosion rate by particle size distribution (PSD) modification of hematite as weighting agent for oil based drilling fluids. Wear, 2009, 266: 1229-1236.
Yu L., Zhang L. B., Fan J. C. Influence of Hematite and Barite on the Friction and Wear Behavior of Casing and Drill Pipe Pair. Tribology, 2004, 24 (5): 462-466.
Gonzáleza J. M., Quinteroa F., Arellanoa J. E. Effects of interactions between solids and surfactants on the tribological properties of water-based drilling fluids. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2011, 391: 216-223.
Xiao G. Z., Zhao G. X., Han Y. Experiments on the abrasion of casings by barite and hematites. Drilling Fluid & Completion Fluid, 2007, 24 (5): 74-75.
Wang P., Lin, K., Wang L. Study on wear properties of heavy agent of drilling mud. Oil Field Equipment, 2005, 34 (2): 27-30.
Browse journals by subject