Editorial Board Members (105)
-
Prof. Mounim Lebrini
Faculty of Science, Technology, and Environment, University of the Antilles, Martinique, France
-
Assist. Prof. Njemuwa Nwaji
Institute of Fundamental Technological Research, Polish Academy of Science, Warsaw, Poland
-
Assoc. Prof. Yassine Beldjoudi
Department of Natural and Medical Sciences Research Centre, University of Nizwa, Birkat Almouz, Oman
-
Dr. Hamid Pourasiabi
School of Mechanical and Mining Engineering, The University of Queensland, Brisbane, Australia
-
Dr. Yang Yang
Department of Materials Science and Engineering, University of Florida, Gainesville, United States
-
Dr. Flavia da Cruz Gallo
Department of Materials Science and Engineering, University of Florida, Gainesville, United States
-
Dr. Wei Che
School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology, Ulsan, South Korea
-
Dr. Rahul Majee
Department of Chemistry, University of St Andrews, St Andrews, United Kingdom
-
Dr. José Ferreira
Department of Materials Science and Engineering, Iowa State University, Ames, United States
-
Dr. Aniruddha Molla
Department of Chemical Engineering, Inha University, Incheon, South Korea
-
Ni Yang
Department of Mechanical &Aerospace Engineering, North Carolina State University, Raleigh, United States
-
Mohammad Mianroodi
Department of Mechanical Engineering, University of Strasbourg, Strasbourg, France
-
Alka Pareek
Research Laboratory of Chemical Film Technologies, Tallinn University of Technology, Tallinn, Estonia
-
Halil Murat Enginsoy
Mechanical and Manufacturing Engineering School, Supmeca-Paris/Quartz-France, Paris, France
-
Ashutosh Kumar
Institut de Chimie Moléculaire et des Matériaux d'Orsay, University of Paris Saclay, Orsay, France
-
Tian Tian
Department of Chemical Engineering, Carnegie Mellon University, Pittsburgh, United States
-
Shatabda Bhattacharya
Graduate School of Engineering Sciences, Osaka University, Osaka, Japan
-
Chang Liu
Chemistry and Nanoscience Center, National Renewable Energy Laboratory, Golde, United States
-
Prof. Lucía Fabiola Cano Salazar
Department of Advanced Materials, Faculty of Chemical Sciences, Autonomous University of Coahuila, Saltillo, Mexico
-
Prof. Shiwei Shi
School of Mechanical Engineering, Dalian University of Technology, Dalian, China
-
Assoc. Prof. Shaohui Xiong
School of Materials Science and Engineering, Hunan University of Science and Technology, Xiangtan, China
-
Assoc. Prof. Wei Xiao
School of Mechatronic and Vehicle Engineering, East China Jiaotong University, Nanchang, China
-
Assoc. Prof. Zain Bairq
Department of Civil Engineering, Changsha University, Changsha, China
-
Assoc. Prof. Xu Chen
School of Physics and Microelectronics, Zhengzhou University, Zhengzhou, China
-
Assoc. Prof. Muhammad Yar Khan
School of Material Science and Engineering, Zhejiang University, Hangzhou, China
-
Assoc. Prof. Fandong Meng
College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, China
-
Assoc. Prof. Bo Zhang
School of Integrated Circuit, Beijing University of Posts and Telecommunications, Beijing, China
-
Assoc. Prof. Yancheng Meng
Key Laboratory for Intelligent Nano Materials and Devices of the Ministry of Education, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing, China
-
Dr. Feng Gao
Special Polymer Research Institute, Institute of Zhejiang University –Quzhou, Quzhou, China
-
Dr. Kelly Leite dos Santos Castro Assis
Materials Metrology Division, National Institute of Metrology, Quality and Technology, Rio de Janeiro, Brazil
-
Dr. Magdalena-Valentina Lungu
Department of Metallic, Composite and Polymeric Materials, National Institute for Research and Development in Electrical Engineering ICPE-CA (INCDIE ICPE – CA), Bucharest, Romania
-
Fujuan Liu
College of Textile and Clothing Engineering, Soochow University, Suzhou, China
-
Wenhan Zhou
School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, China
-
Haitao Zhang
School of Materials Science and Engineering, Southwest Jiaotong university, Chengdu, China
-
Jun Xia
School of Materials Science and Engineering, Beihang University, Beijing, China
-
Qingguo Shao
School of Materials Science and Engineering, China University of Petroleum (East China), Qingdao, China
-
Wanneng Ye
Department of Physics, Qingdao University, Qingdao, China
-
Haijun He
College of Textile Science and Engineering, Jiangnan University, Wuxi, China
-
Lala Gahramanli
Faculty of Physics, Baku State University, Baku, Azerbaijan
-
Charoen Nakason
Prince of Songkla University, Surat Thani, Thailand
-
Maria Mathabathe
Department of Science and Technology, Council for Scientific and Industrial Research, Pretoria, South Africa
-
Prof. Neeraja Katta
Department of Physics, Narasaraopeta Engineering College, Guntur, India
-
Assist. Prof. Vikash Mishra
Department of Physics, Manipal Institute of Technology, Manipal, India
-
Assist. Prof. Md. Motin Seikh
Department of Chemistry, Visva-Bharati University, Santiniketan, India
-
Assoc. Prof. Mallieswaran Kuppusamy
Department of Mechanical Engineering, CK College of Engineering & Technology, Cuddalore, India
-
Dr. Nagaraj S
Advanced Materials Laboratory, Council of Scientific and Industrial Research–Central Leather Research Institute, Chennai, India
-
Dr. Umer Mushtaq
Department of Physics, National Institute of Technology, Srinagar, Srinagar, India
-
Dr. Abhishek Ghosh
Department of Metallurgy and Materials Engineering, Indian Institute of Engineering Science and Technology, Howrah, India
-
Dr. Bala Ismail Adamu
Department of Physics, Federal University Dutse, Dutse, Nigeria
-
Shobhnath Gupta
Department of Chemistry, Indian Institute of Technology Bombay, Mumbai, India
-
Krutika Routray
Department of Physics, C. V. Raman Global University, Bhubaneswar, India
-
Y. Ashok Kumar Reddy
Indian Institute of Information Technology, Design and Manufacturing, (IIITDM) Kancheepuram, Chennai, India
-
Adityanarayan Pandey
Department of Electrical Engineering, Indian Institute of Technology Bombay, Mumbai, India
-
Prof. Enrique Flórez-Gil
Department of Health Science, Universidad Isabel I, Burgos, Spain
-
Assist. Prof. Ali Hajjiah
Electrical Engineering Department, Kuwait University, Kuwait, Kuwait
-
Assoc. Prof. Nuno Calçada Loureiro
Department of Industrial Production Engineering, Instituto Superior de entre Douro e Vouga, Santa Maria Da Feira, Portugal
-
Dr. Aniruddha Basu
Renewable and Sustainable Energy Institute, University of Colorado, Boulder, United States
-
Dr. Chenjing Yang
School of Engineering and Apllied Sciences, Harvard University, Boston, United States
-
Dr. Jobin Varghese
Hybrid Microsystems, Fraunhofer IKTS, Dresden, Germany
-
Dr. Kalaiselvan Ganesan
Department of Physics, University of Cambridge, Cambridge, United Kingdom
-
Dr. Laura Francés Soriano
Institute of Molecular Science, University of Valencia, Paterna, Spain
-
Dr. Deliang Guo
GE Vernova Advanced Research, Niskayuna, United States
-
Dr. Dineshkumar Sengottuvelu
Center for Graphene Research and Innovation, University of Mississippi, Oxford, United States
-
Zahida Malik
School of Chemistry, University of Southampton, Southampton, United Kingdom
-
Aliouat Mouaad Yassine
Department of Physics, Institut Matériaux Microélectronique Nanosciences de Provence, Aix-Marseille University, Marseille, France
-
Mehrdad Rostami Osanloo
Department of Physics, The University of Texas at Dallas, Richardson, United States
-
Prashanth Sandineni
Department of Chemistry, Missouri University of Science and Technology, Rolla, United States
-
Vediyappan Thirumal
School of Mechanical Engineering, Yeungnam University, Daegu, South Korea
-
Beko Mesic
Department of Engineering and Chemical Sciences, Karlstad University, Karlstad, Sweden
-
Dongmei Dong
Department of Physics and Astronomy, Rowan University, New Jersey, United States
-
Prof. Shujie Jiao
School of Materials Science and Engineering , Harbin Institute of Technology, Harbin, China
-
Prof. Zhen Zhang
School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an, China
-
Assoc. Prof. Xiangkai Kong
Department of New Energy Materials and Devices, China University of Mining and Technology, Xuzhou, China
-
Assoc. Prof. Xingda An
Institute of Functional Nano and Soft Materials (FUNSOM), Soochow University, Suzhou, China
-
Assoc. Prof. Sabahattin Deniz
Department of Textile Engineering, Marmara University, Istanbul, Turkey
-
Assoc. Prof. Yuanyuan Huang
College of Engineering and Technology, Southwest University, Chongqing, China
-
Assoc. Prof. Luqing Cui
School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an, China
-
Assoc. Prof. Liyong Wang
School of Energy and Power Engineering, North University of China, taiyuan, China
-
Assoc. Prof. Rongjian Pan
The First Sub-Institute, Nuclear Power Institute of China, Chengdu, China
-
Assoc. Prof. Renxing Lin
College of Engineering and Applied Sciences, Nanjing University, Nanjing, China
-
Dr. Zhiyong Sun
College of Biotechnology and Bioengineering, Zhejiang University of Technology, Hangzhou, China
-
Dr. Syed Ul Hasnain Bakhtiar
School of Integrated Circuits, Huazhong University of Science and Technology, Wuhan, China
-
Dr. Junyi Che
Institute of Translational Medicine, Nanjing Drum Tower Hospital, Nanjing, China
-
Gilberto Pavani
Federal Institute of Rio Grande do Sul, Bento Gonçalves, Brazil
-
Zhenghua Tang
Department of Metallic Materials, School of Materials Science and Engineering, Sichuan University, Chengdu, China
-
Dan Wu
School of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan, China
-
Xiaolong Xu
College of Materials Science and Engineering, North University of China, Taiyuan, China
-
Sarah Mendes
Department of Engineering, UERJ - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, Brazil
-
Tingping Hou
College of Science, Wuhan University of Science and Technology, Wuhan, China
-
Lili Feng
College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin, China
-
Dr. Lerato Hlekelele
Department of Chemicals, Council for Scientific and Industrial Research, Pretoria, South Africa
-
Imène Hebbar
Department of Mechanical Engineering, University of Technologie, Mostaganem, Algeria
-
Nabil Hebbar
Department of Architecture, Faculty of science and technology, Abdelhamid Ibn Badis University, Mostaganem, Algeria
-
Prof. Ganesh Patil
Department of Physics, SNJB's KKHA Arts, SMGL Commerce and SPHJ Science College, Chandwad, India
-
Prof. Shobha Waghmode
Department of Chemistry, MES Abasaheb Garware College, Pune, Pune, India
-
Assist. Prof. Tarak Nath Mandal
Department of Chemistry, SRM Institute of Science and Technology, Kattankulathur, Chennai, India
-
Assoc. Prof. Manisha Singh
Department of Physics, Amity University Gwalior, Gwalior, India
-
Assoc. Prof. Boopathy Govindarajan
Department of Aeronautical Engineering, Vel Tech Rangarajan Dr.Sagunthala R&D Institute of Science and Technology, Chennai, India
-
Dr. Sreeram P R
Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur, India
-
Dr. Irfan Ayoub
Department of Physics, National Institute of Technology, Srinagar, India
-
Dr. Kuldeep Singh Gour
Advanced Materials and Corrosion Division, Council of Scientific and Industrial Research-National Metallurgical Laboratory, Jamshedpur, India
-
Sekhar Babu Pendyala
Department of Mechanical Engineering, Narsimha Reddy Engineering College, Hyderabad, India
-
Sharath B.N
Department of mechanical Engineering, Malnad College of Engineering, Hassan, India
-
Bachir Yaou Balarabe
Department of Nanotechnology, School of Engineering and Technology, National Forensic Sciences University, Gandhinagar, India
-
Chellasamy Velu
Center for Nanoscience and Technology, Pondicherry University, Pondicherry, India