Advances in Materials

Reviewers (113)
  • Dr. Sagar Sarkar
    Department of Physics and Astronomy, Uppsala University, Uppsala, Sweden
  • Dr. Osamah Ali
    Department of Materials Engineering, University of Pannonia, Veszprem, Hungary
  • Dr. Andrea Sala
    Department of Electron Crystallography, Italian Institute of Technology, Pontedera, Italy
  • Dr. Sabir Hussain
    Department of Advanced Materials and Surfaces, Tyndall National Institute, University College Cork, Cork, Ireland
  • Dr. Thi Hoa Vu
    Department of Physics, University of Ulsan, Ulsan, South Korea
  • Dr. Mohsen Sanayei
    Department of Innovation and Sustainability, Husky Technologies, Bolton, Canada
  • Dr. Changmin Shi
    School of Engineering, Brown University, Providence, United States
  • Dr. Rehan Younas
    Micron Technology, Inc., Boise, United States
  • Dr. Hadi Moeinnia
    Mechatronics Systems Engineering, Simon Fraser University, Burnaby, Canada
  • Dr. Nikesh Maharjan
    Brooklyn College, The Graduate School and University Center of the City University of New York, New York City, United States
  • Imteaz Rahaman
    Department of Electrical and Computer Engineering, The University of Utah, Salt lake city, United States
  • Anyang Hu
    Department of Chemistry, Virginia Tech, Blacksburg, United States
  • Kaixuan Zhang
    Research Institute for Basic Sciences, Seoul National University, Seoul, South Korea
  • Kallol Roy
    Department of Chemistry, Virginia Commonwealth University, Richmond, United States
  • Roman Kolodka
    Department of Physics, University of Puerto Rico, San Juan, United States
  • Franjo Kozina
    Faculty of Metallurgy, University of Zagreb, Zagreb, Croatia
  • Rajat Arora
    Data Center GPU Team, Advanced Micro Devices, Inc., Austin, United States
  • Minh Anh Luong
    Center for Materials Elaboration and Structural Studies, French National Centre for Scientific Research, Toulouse, France
  • Gaurav Arora
    High Power Targetry R&D, Fermi National Laboratory, Batavia, United States
  • Assist. Prof. Huicai Xie
    Key Laboratory of Rare Earths, Ganjiang Innovation Academy, Chinese Academy of Sciences, Ganzhou, China
  • Dr. Xu Chunyang
    Laboratory of Advanced Materials, Fudan University, Shanghai, China
  • Dr. Yinyu Xiang
    Department of Chemistry, Wuhan University of Technology, Wuhan, China
  • Dr. Ali Akhtar
    Hangzhou Institute of Advanced Studies, Zhejiang Normal University, Jinhua, China
  • Dr. Fu Yanqi
    School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, China
  • Dr. Yuanhao Wu
    Institute of Clinical Medicine, Peking Union Medical College Hospital, Beijing, China
  • Dr. Changfang Zhao
    School of Aerospace Engineering, Tsinghua University, Beijing, China
  • Chai Hua Tay
    Institute of Tropical Forestry and Forest Product, Universiti Putra Malaysia, Serdang, Malaysia
  • Miguel Laper
    Department of Metallurgical and Materials Engineering, Federal University of Minas Gerais, Belo Horizonte, Brazil
  • Marcos Fontes
    Mechanical Engineering, Federal Institute of São Paulo, São Paulo, Brazil
  • M.-Sadeeq Balogun
    College of Materials Science And Engineering, Hunan University, Changsha, China
  • Zahoor Ahmad
    School of Materials Science and Engineering, Zhejiang Sci-Tech University, Hangzhou, China
  • Yuyu Tian
    Institute of Systems Engineering, China Academy of Engineering Physics, Mianyang, China
  • Mariane Pereira
    Department of Engineering, Federal University of Lavras, Lavras, Brazil
  • Dr. Morongwa Ramoroka
    Department of Chemistry, University of Cape Town, Cape Town, South Africa
  • Jelena Blagojević Filipović
    Innovation Center of the Faculty of Chemistry, University of Belgrade, Belgrade, Serbia
  • Prof. Sudhir Kulkarni
    Department of Physics, Shivaji University, Kolhapur, India
  • Assist. Prof. Manoj Srivastava
    Department of Physics, D.A.V. Post Graduate College Dehradun, Deen Dayal Upadhyaya Gorakhpur University Gorakhpur, Gorakhpur, India
  • Assist. Prof. Md Shafiqul Islam
    Department of Physics, International University of Business Agriculture and Technology, Dhaka, Bangladesh
  • Assist. Prof. Ravuri Venkateswara Rao
    Department of Mechanical, Vignana Bharathi Institute of Technology, Hyderabad, India
  • Assist. Prof. Narayanaswamy Sake
    Department of Metallurgical Engineering, Indian Institute of Technology (Banaras Hindu University) , Varanasi, India
  • Assist. Prof. Raj Kumar Pittala
    Department of Mechanical Engineering, Koneru Lakshmaiah Education Foundation, Vijayawada, India
  • Assist. Prof. Mohammed Asif Kattimani
    Department of Mechanical Engineering, Lords Institute of Engineering and Technology, Hyderabad, India
  • Assist. Prof. Jessica Fernando
    Department of Chemistry, Manonmaniam Sundaranar University, Tuticorin, India
  • Assoc. Prof. Mourad Boutahir
    Department of Sciences, Moulay Ismail University, Meknes, Morocco
  • Dr. Adnan Shahzaib
    Department of Chemistry, Jamia Millia Islamia, Delhi, India
  • Dr. Amalesh Kumar
    Department of Physics, Indian Institute of Technology Guwahati, Guwahati, India
  • Dr. Peeyush Phogat
    Department of Physics, Netaji Subhas University of Technology, New Delhi, India
  • Dr. Ajit Kumar
    Department of Materials Engineering, Indian Institute of Science, Bengaluru, India
  • Dr. Baban Dey
    Department of Chemical Engineering, Birla Institute of Technology, Mesra, Ranchi, India
  • Dr. Nayana Devaraj
    Solid State and Structural Chemistry Unit, Indian Institute of Science, Bangalore, India
  • Priyabrata Sahoo
    Centre for Nano and Soft Matter Sciences, Bengaluru, India
  • Prahadeeswaran M
    Department of Industrial Engineering, College of Engineering Guindy, Anna University Chennai, Chennai, India
  • Ladan Dayani
    Department of Pharmaceutics, School of Pharmacy and Pharmaceutical sciences, Isfahan University of Medical Sciences, Isfahan, Iran
  • Ammasi A
    Department of Metal Extraction and Recycling, CSIR-National Metallurgical Laboratory, Jamshedpur, India
  • Sujan Kar
    Laser Biomedical Applications Division, Raja Ramanna Centre for Advanced Technology, Indore, India
  • Sikta Mandal
    School of Electronics Engineering, Kalinga Institute of Industrial Technology, Bhubaneswar, India
  • Muhammad Jamshaid
    Institute of Chemistry, The Islamia University of Bahawalpu, Bahawalpur, Pakistan
  • Dr. Muhammad Sheeraz
    Department of Physics, University of Ulsan, Ulsan, South Korea
  • Dr. Qiaomiao Tu
    KLA Corporation, Milpitas, United States
  • Dr. Van Huy Nguyen
    Department of Physics and Astronomy, National Graphene Institute, University of Manchester, Manchester, United Kingdom
  • Dr. Yiding Liu
    School of Physics, Engineering and Computer, University of Hertfordshire, Hatfield, United Kingdom
  • Dr. Muhammad Shah Zeb Khan
    Department of Civil, Materials and Environmental Engineering, University of Illinois, Chicago, United States
  • Dr. Pargam Vashishtha
    Department of Engineering, RMIT University, Melbourne, Australia
  • Dr. Papa Amoah
    Department of Electrical and Computer Engineering, Old Dominion University, Norfolk, United States
  • Dr. Ying Yi Tan
    Department of Engineering and Product Design, Singapore University of Technology and Design, Singapore
  • Dr. Cheng Zeng
    College of Engineering, The Roux Institute at Northeastern University, Portland, United States
  • Kingsley Amatanweze
    Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, United States
  • Shalu Atri
    Department of Chemistry, Faculty of Natural Science, Comenius University, Bratislava, Slovakia
  • Qingguo Bai
    Ira A. Fulton Schools of Engineering, Arizona State University, Tempe, United States
  • Liege Aguiar Pascoalino
    Centro de Investigação da Montanha, Polytechnic Institute of Bragança, Bragança, Portugal
  • Lin Wang
    Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, United States
  • Zheng Xiong
    Department of Computer Science and Engineering, University of South Carolina, Columbia, United States
  • Ehsan Mehrdad
    Department of Mechanical Engineering, The University of Texas at Dallas, Richardson, United States
  • Jyoti Pandey
    Department of Physics, Faculty of Science, Central Michigan University, Mount Pleasant, United States
  • Can Cui
    Department of Civil and Environmental Engineering, University of South Florida, Tampa, United States
  • Assist. Prof. Bing Deng
    School of Environment, Tsinghua University, Beijing, China
  • Assist. Prof. Linlin Wang
    School of Aeronautics, Harbin Institute of Technology, Harbin, China
  • Dr. Dawei Wang
    Department of Materials Science and Engineering, Southern University of Science and Technology, Shenzhen, China
  • Dr. Bin Liu
    College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin, China
  • Dr. Bo Zhang
    Road Material Research Institute, Shanxi Transportation Technology Research and Development Co. Ltd., Taiyuan, China
  • Dr. Pengxiao Zhu
    Industrial Technology Research Institute, Jiangsu Xugong Engineering Machinery Research Institute Co., Ltd, Xuzhou, China
  • Dr. Shiwei Ren
    Department of Materials Science and Engineering, Fudan University, Shanghai, China
  • Dr. Tiago Matos
    Technology Sector, Federal University of Parana, Curitiba, Brazil
  • Ximin Yaun
    Department of Materials Science and Engineering, Harbin Institute of Technology, Harbin, China
  • Ning Fu
    School of Environmental and Municipal Engineering, Lanzhou Jiaotong University, Lanzhou, China
  • Carlos Cuao
    School of Electrical and Mechanical Engineering, Autonomous University of Nuevo Leon, San Nicolas de los Garza, Mexico
  • Kai Liu
    Luoyang Normal University, Luoyang, China
  • Nayara Serge
    Institute of Chemistry, São Paulo State University, Araraquara, Brazil
  • Rashid Iqbal
    Department of Chemistry, Shandong University, Jinan, China
  • Dr. Yousra Megdoud
    Institute of Sciences, University Center of Tipaza, Morsli Abdellah, Tipaza, Algeria
  • Dr. Hocine Ouaer
    Department of Mining and Oil Field, Faculty of Hydrocarbons and Chemistry, University of Boumerdes, Boumerdes, Algeria
  • Sumesh Narayan
    Faculty of Science, Technology and Environment, The University of the South Pacific, Nausori, Fiji
  • Assist. Prof. Ravisankar M S
    Department of Applied Physics, Saveetha School Engineering, Saveetha University, Chennai, India
  • Assist. Prof. Archana Venkatachalam
    Department of Physics, Dhanalakshmi Srinivasan University, Trichy, India
  • Assist. Prof. Anima Ghosh
    Department of Physics, SR University, Warangal, India
  • Assist. Prof. Manas Mandal
    Department of Chemistry, Sree Chaitanya College Habra, Kolkata, India
  • Assist. Prof. Rupali Nagar
    Department of Applied Science, Symbiosis Institute of Technology Pune, Pune, India
  • Assist. Prof. Komal Kanwar
    Department of Applied Sciences, Suresh Gyan Vihar University, Jaipur, India
  • Assist. Prof. Rayappa Shrinivas Mahale
    Department of Mechanical Engineering, Jain College of Engineering and Research, Visvesvaraya Technological University, Belagavi, India
  • Assoc. Prof. Fayaz Ahmad Najar
    Department of Physics, Government Degree College, Kashmir University, Srinagar, India
  • Assoc. Prof. Radha Krishnan P
    Department of Aeronautical Engineering, ACS College of Engineering, Bangalore, India
  • Dr. Imen Cherif
    Department of Physics, University of Monastir, Monastir, Tunisia
  • Dr. Venkata Ramanan S
    School of Mechanical Engineering, Vellore Institute of Technology, Vellore, India
  • Dr. Imran Ahmad Salmani
    Department of Physics, Jamia Millia Islamia, New Delhi, India
  • Dr. Mohamed Ragab
    Faculty of Engineering, Benha University, Cairo, Egypt
  • Dr. Md. Salahuddin Sourav
    Department of Material Science, Bangladesh Atomic Energy Commission, Dhaka, Bangladesh
  • Dr. Ramli Barmawi
    Department of Mechanical Engineering, Manufacturing Polytechnic of Bangka Belitung, Sungailiat, Indonesia
  • Shahzad Ahmed
    Department of Metallurgical and Materials Engineering, Indian Institute of Technology Jodhpur, Jodhpur, India
  • Mousri Paul
    Surface Physics and Material Science Division, Saha Institute of Nuclear Physics, Kolkata, India
  • Vikas Kumar Pandey
    Deptartment of Chemical Engineering and Technology, Indian Institute of Technology (BHU) Varanasi, Varanasi, India
  • Rachid Masrour
    Faculty of Sciences Dhar El Mahraz, Sidi Mohamed Ben Abdellah University, Fez, Morocco
  • Sabyasachi Pramanik
    Department of Chemistry, Rajiv Gandhi Institute of Petroleum Technology, Sivasagar, India
  • M'hamed Oubla
    Department of Physics, Faculty of Sciences, Mohammed V University in Rabat, Rabat, Morocco